Over 100,000+ IoT devices in use, with partners who trust us
Most digital traps simply report “triggered.”Emitter® Direct 2.0 clearly distinguishes between three states:
All set —the trap is ready to go, everything’s in order.
Triggered but empty —the trap has been triggered, but there is no rodent inside. You know that intervention is necessary, but no rodent needs to be removed.
Triggered with a catch —a rodent was caught. The trap will be replaced and disposed of in accordance with animal welfare regulations.
The difference has practical implications: An empty pickup requires a different response than a pickup. Anyone who can’t tell the difference will make unnecessary trips or arrive too late.
Replace the trap in seconds: Since the sensor is built right into the trap itself, when you make a catch, simply swap out the entire trap for a new one. No need to reinstall magnets or transfer sensors from the old trap to the new one.
It is reported immediately, including information on
as to whether a catch has been made.
Once a day—the trap confirms,
, that it is active and connected.
They are collected and transmitted in batches until the next sign of life is detected. Many signals indicate high activity; few signals may indicate a single visit.
If more than 10 movements are detected, the trap sends an additional alert regardless of the daily rhythm—you'll be notified immediately if activity is unusually high.
Each trap already contains a SIM card—no router, no gateway, and no on-site Wi-Fi. Data is transmitted via 4G using the IoT standards NB-IoT and Cat-M: energy-efficient, with strong signal penetration through buildings, and available worldwide. This ensures that data is transmitted even from the basement or a remote warehouse.
Management, evaluation, statistics
In this video you will learn, among other things
The screenshots shown here are a preview of the new version of the app, which will be available soon. The current version differs slightly, but contains similar features.
You can create, change and manage all emitter products simply and easily in the control center.
Keep track of all traps, transmitters, routers and controllers installed at your customers.
Check anytime, anywhere to see if anything has happened in your traps.
Receive images taken by the PestCam 2.0 directly on your smartphone.
From Android 5.1 or iOS 11.0 For tablet or smartphone. Available in 9 languages.
There are no additional costs for using the app. The app is free to use. To cover the running costs, an annual administration fee is included in your Emitter service plan.
NEW
PestControl 4.0 is the central interface that brings together pest control software and hardware providers in one system. This means that quality standards are maintained, you only need one integration instead of many individual solutions, and the connection is made quickly with minimal effort.
First-Generation Transmitter-Based Radio-Assisted Catch Reporting Hits the Market
The Emitter Outdoor transmits up to 1,500 m via Long Range
Report the first sensors without a repeater or gateway
Energy-efficient, suitable for buildings, available worldwide
4G with NB-IoT and Cat-M
Head of Sales and IoT Development
sebastian@futura-germany.com
+49 (0)170 919 976 4
